ISO: Baby Lupah Back Plate Screws

3cats5

3cats5

Tyme Traveler
Founding Member
Joined
Jul 11, 2014
Messages
824
Hi all,
I have a couple of Baby Lupahs that need screws for the backplate. Any ideas about how to get some? I don't know the size or thread number on these so I have not tried to order from the internet. If you have that information please let me know. Are all the screws for the Baby Lupah watches the same? So many questions...
 
Good Question. My wife has several Baby Lupah's but I haven't lost a screw yet changing out her batteries.🤞
Tried a direct search w/o results.
Perhaps if you knew the size, watch model # or posted a pic that would help too.
I found this @ Esslinger.
There is a graph of included sizes.
81.326-chart.gif

You may have to buy a assortment set @ Esslinger or on Amazon and give it a try. :wink:
Good Luck! 🍀
Stainless Steel Case Back Screw Assortment 360 Pieces

QUICK VIEW

Stainless Steel Case Back Screw Assortment 360 Pieces​

$27.99
ADD TO CART
 
I looked when I first seen this thread. Trying to fine screws that fit is like a needle in a haystack. All of my Renato Vulcans use these tiny screws and the head screw slots are super fragile. The slightest pressure and they become useless. Back when Renato was in business Nancy would send them to me or have me send the watch head and she would have new ones put in. Good luck figuring out the correct size.

53554558560_6bf2ba9e0d_b.jpg
53554308953_c4cabf0895_b.jpg
53553256277_2fbd95138c_c.jpg
53553256327_8775c6c517_b.jpg
53554448149_e618f7aee7_b.jpg


53554558500_ff9d39b81a_b.jpg
 
Thanks for all the input. I thought of finding a non-working Baby Lupah cheap but didn't think it was worth it. I found an assortment of tiny screws on Amazon and they fit the back pretty well. I might see if I can find someone local to show me how to get an exact measurement so I can order them. If I do I will post the size.
 
Back
Top Bottom