The ISL-21 packs a lot of features: domed sapphire crystal, sapphire bezel insert, and solid links. Inside the 38mm case is an NH36, 24-jewel auto

roadwarrior

Grand Tyme Master
Founding Member
Joined
Jul 17, 2014
Messages
64,645
122517541_3417747821596005_2704970356529495738_n.png


The ISL-21 packs a lot of features: domed sapphire crystal, sapphire bezel insert, and solid links. Inside the 38mm case is an NH36, 24-jewel automatic movement.

The looks and quality are solid.

https://www.longislandwatch.com/Isl...nmX_i_6dxkl0R3Lg2ceDm1AZIyBZTY8j_QIXtjvd2KXng

122505117_3417747838262670_7701547016080449701_n.jpg

Islander 38mm Automatic Dive Watch with Solid-Link Bracelet, AR Sapphire Crystal, and Luminous Sapphire Bezel Insert #ISL-21​


Island Watch would like to introduce you to the new Islander dive watch. You will immediately notice that is has a very familiar 38mm case with an offset screw-down crown at 4:00. Thickness is 13mm and tip to tip it is a very wearable 44.5mm. Note that the lug ends are drilled for easier bracelet to strap changes. The case back has a rendering of Long Island on it along with the Islander name, Island Watch and 200 meter water resistance.

Inside the case is an NH36, 24-jewel automatic movement with 21,600 vibrations per hour. This self-winding movement supports hand winding and hacks (seconds hand stops when you pull out the crown). Power reserve is about 41 hours fully wound. The NH36 also has both a day and date wheel viewed at 3:00 on the dial.

The green dial has SuperLuminova on the hands and hour makers and the Island Watch logo is black under 12:00. The 120-click uni-directional bezel has a scratch-resistant green sapphire insert that is also treated with SuperLuminova for a maximum glow-in-the-dark experience when lights go out.

The dial has enhanced visibility due to the use of an anti-reflective double dome sapphire crystal that also guards against scratches.
The anti-reflective coating is on the underside of the sapphire and it imparts a bluish hue at some viewing angles. The ISL-21 green dial model is fitted with a set of distinctive MM-style hands with the red dot-white dot seconds hand. This model also features a distinctive coin-edge bezel.

Upgraded: The bracelet has solid links, and solid end links. Screws are now used for adjustments (instead of pins) for sizing the bracelet. It now also features a robust milled scissor push-button deployant clasp with three position micro-adjustment.
Also, The crown is now signed with the Island Watch logo.

NOTE: The Islander dive and dual-time watch is compatible with aftermarket parts available at Island Watch (and elsewhere) for the SKX013 models, such as crystals, bezels, inserts, chapter rings, dials, hands, bracelets, etc.


ISL-21-12.jpg
ISL-21-11.jpg


Watch Features:
  • Movement: NH36 Automatic (self-winding, hand wind, hacks)
  • Case: Stainless steel, 38mm x 13mm thick. 44.5mm tip to tip
  • Back: Engraved screw-in back
  • Crystal: Anti-reflective (blue hue) flat sapphire
  • Band: Bracelet with all solid links, Milled Scissor Deployant Clasp, 20mm.
  • Water Resistant: 200 meters
  • Warranty: 1 Year
ISL-21-7.jpg
ISL-21-5.jpg
ISL-21-9.jpg
ISL-21-10.jpg


  • SII NH36 Movement with day and date
  • 38mm x 13mm x 44.5mm
  • Solid screw back, etched
  • Double Dome AR Sapphire Crystal
  • Bracelet with solid end links, solid links, screws for size adjustment
  • Milled scissor deployant clasp with 3 position micro adjust
  • Water Resistant to 200 Meters
  • Unidirectional 120 click bezel
  • Superluminova C3 Luminous sapphire bezel insert
  • Drilled end lugs
  • C3 superluminova
  • 1 yr warranty
https://www.longislandwatch.com/manuals_s/2003.htm
 
Just wish Marc would offer this version at the Full size of Islanders (43mm), concerned 38mm just too small a look for my 7” wrist.
 
Back
Top Bottom