- Joined
- Jul 17, 2014
- Messages
- 65,385
Introducing new CREPAS Watches Hydrographer 1942M by OceanicTime
- Thread starter roadwarrior
- Start date
- Joined
- Jul 13, 2014
- Messages
- 7,348
- Joined
- Jul 17, 2014
- Messages
- 65,385
http://www.crepaswatches.com/styled/styled-2/photos-12/index.html
We would like to give more details about the CREPAS HYDROGRAPHER model.
The movement, an ETA 2892-A2, would be modified at Switzerland to get a stem with only two positions: position 0 for manual winding and position 1 for setting the time. The stem position for stting the date would be removed, not only taking off the date disc, all the date system and stem positions would be modified to get only two position instead the three position.
ETA 2892-A2 Top grade or Elaboree grade pending to confirm.
Assembled and tested at Switzerland.
Solid stainless steel crown. The crown has not a canteen design.
Standard system to change the straps using a 22mm spring bar with 1,80mm diameter.
Black textured dial.
The crown is 9mm long and 8,50mm diameter.
It is possible to order the HYDROGRAPHER with the crown at 9 hour position.
The automatic helium valve would be placed at case back cover.
The the bezel would be turnable to the left.
The side of the sapphire lens would be polished.
Each customer would receive a made to measure leather strap manufactured by Jacobstraps.
The price of the model for the 100 customers is 699 euros (including shipping cost but plus 21% for European residents)
We have made a comparison between the HYDROGRAPHER and the Tektite models in order you could compare both sizes
We would like to introduce the new CREPAS HYDROGRAPHER.
This new model is launched as a crowdfunding campaign.
This project is manage togheter with OceanicTime, where OceanicTime has developed the concept and CREPAS WATCHES has done the engineering of the watch.
Limited Edition TBC pieces
PRICE: 699€ first 100 units
(+ 21% VAT in EU)
PRICE: 850€ (+ 21% VAT in EU)
Measures
- Diameter of the bezel: 45mm
- Diameter of the case: 45mm
- Thickness without crystal: 15mm
- Length: 52mm
- Thickness of the crystal: 5,50mm
- Diameter of the crystal: 33,00mm
- Space between lugs: 22mm
- Diameter of the crown: 8,75mm
- Thickness of the bezel: 4mm
- Thickness of the case back cover: 5,50mm Materials
- Case, bezel, crown and case cover made of surgical stainless steel 316L
- Crystal made of sapphire
- Gaskets made of Viton and Tefzel
- Calf leather strap and nylon strap
- Hands and dial with Swiss Superluminova “Old Radium”Features
- Swiss ETASA 2892-A2
- Water resistant 194 atmos. / 1942 meters/ 6400 ft. Screwed crown and case back cover
- Sandblasted case finished
- Inside AR coated anti scratch crystal
- Turnable bezel
- Automatic helium valve at case back cover
- Made to measure leather strap by Jacobstraps
- SWISS MADE
During 30 days any person could pre-reserve the watch with 50 euros. After that time, if we get 100 pre-orders, we will continue with the process, if not, we will refund all reserves taken. In case of success, the will collect 200 euros more, leaving the rest pending until one month before delivery. During the first 30 days the 50 euros paid can be returned if ordered, however, once the project is firm, no amount delivered is returned.
The price of the model is 850 euros (plus VAT 21% for EU residents) however, first 100 pieces will be offered for 699 euros (plus VAT 21% for EU residents), the rest of the watches sold during the manufacturing period will have a price of 799 euros (plus VAT 21% for EU residents). Once the production is ready for delivery, the price will be 850 euros.
Enjoy the whole story of this project following the link to OceanicTime: http://oceanictime.blogspot.com/
If we get 100 backers we will order the prototype manufactuting that we would get in two months. Once the prototype is approved, the watches would be ready in four months.
We would like to give more details about the CREPAS HYDROGRAPHER model.
The movement, an ETA 2892-A2, would be modified at Switzerland to get a stem with only two positions: position 0 for manual winding and position 1 for setting the time. The stem position for stting the date would be removed, not only taking off the date disc, all the date system and stem positions would be modified to get only two position instead the three position.
ETA 2892-A2 Top grade or Elaboree grade pending to confirm.
Assembled and tested at Switzerland.
Solid stainless steel crown. The crown has not a canteen design.
Standard system to change the straps using a 22mm spring bar with 1,80mm diameter.
Black textured dial.
The crown is 9mm long and 8,50mm diameter.
It is possible to order the HYDROGRAPHER with the crown at 9 hour position.
The automatic helium valve would be placed at case back cover.
The the bezel would be turnable to the left.
The side of the sapphire lens would be polished.
Each customer would receive a made to measure leather strap manufactured by Jacobstraps.
The price of the model for the 100 customers is 699 euros (including shipping cost but plus 21% for European residents)
We have made a comparison between the HYDROGRAPHER and the Tektite models in order you could compare both sizes
We would like to introduce the new CREPAS HYDROGRAPHER.
This new model is launched as a crowdfunding campaign.
This project is manage togheter with OceanicTime, where OceanicTime has developed the concept and CREPAS WATCHES has done the engineering of the watch.
Limited Edition TBC pieces
PRICE: 699€ first 100 units
(+ 21% VAT in EU)
PRICE: 850€ (+ 21% VAT in EU)
- Diameter of the bezel: 45mm
- Diameter of the case: 45mm
- Thickness without crystal: 15mm
- Length: 52mm
- Thickness of the crystal: 5,50mm
- Diameter of the crystal: 33,00mm
- Space between lugs: 22mm
- Diameter of the crown: 8,75mm
- Thickness of the bezel: 4mm
- Thickness of the case back cover: 5,50mm Materials
- Case, bezel, crown and case cover made of surgical stainless steel 316L
- Crystal made of sapphire
- Gaskets made of Viton and Tefzel
- Calf leather strap and nylon strap
- Hands and dial with Swiss Superluminova “Old Radium”Features
- Swiss ETASA 2892-A2
- Water resistant 194 atmos. / 1942 meters/ 6400 ft. Screwed crown and case back cover
- Sandblasted case finished
- Inside AR coated anti scratch crystal
- Turnable bezel
- Automatic helium valve at case back cover
- Made to measure leather strap by Jacobstraps
- SWISS MADE
During 30 days any person could pre-reserve the watch with 50 euros. After that time, if we get 100 pre-orders, we will continue with the process, if not, we will refund all reserves taken. In case of success, the will collect 200 euros more, leaving the rest pending until one month before delivery. During the first 30 days the 50 euros paid can be returned if ordered, however, once the project is firm, no amount delivered is returned.
The price of the model is 850 euros (plus VAT 21% for EU residents) however, first 100 pieces will be offered for 699 euros (plus VAT 21% for EU residents), the rest of the watches sold during the manufacturing period will have a price of 799 euros (plus VAT 21% for EU residents). Once the production is ready for delivery, the price will be 850 euros.
Enjoy the whole story of this project following the link to OceanicTime: http://oceanictime.blogspot.com/
If we get 100 backers we will order the prototype manufactuting that we would get in two months. Once the prototype is approved, the watches would be ready in four months.
- Joined
- Jul 17, 2014
- Messages
- 65,385
- Joined
- Jul 17, 2014
- Messages
- 65,385
- Joined
- Jul 17, 2014
- Messages
- 65,385
