H2O Kalmar watch band sizing?

tpdtopcop

Tyme Watcher
Joined
Sep 23, 2014
Messages
25
Hi all,

Bought a new to me H2O Kalmar 1 and need to add links to bracelet. Any insight on how to size this bracelet and where to get extra links? I have sized friction pin and screw type but can't figure this type of bracelet.
 
My H20 bracelets use screws. They come with the tool to use on the hex head. The links can probably be sourced from Clemens, but they won't be cheap. Good luck. One good thing is if you can't get the links you can always buy a really nice bracelet from Strapcode with straight end links for more than half the price of the H2O and it will use flat head screws in the links.



30541887134_7cdacfe8e5_b.jpg


H2O HEX SCREW DRIVER M1.5 - MADE IN GERMANY - HARDENED HEX TIP. ... H2O TIBURON DLC · H2O KALMAR 2 25000M · H2O KALMAR 2 OCEANICTIME 8000M / 10 YEAR EDITION.


 
Last edited:
Thanks for the links. I believe I have the screwdriver with the watch I purchased. Where can you get like two or three extra links?
 
Good luck.

That sounds about right. It took me a half-dozen when I purchased a trinket that cost me almost a grand. He sent me a trinket that did not have the hands I specified without ever notifying me to ask if it was OK. It eventually took many times to catch up and get a response. He finally told me if I wanted to get the correct hands I would have to pay to have it shipped back both ways. He did eventually send me the correct hands to have replaced. That was OK, but I did not see the sense of a watchmaker cracking open a 8000m trinket that would have to be pressure tested. I can't see many having the equipment to do such a test. Even if they did it would only be another added cost on a trinket that should have shipped correctly in the first place from a brand whose foundation is .. tailor made for you!

CUSTOM MADE AND UNIQUE!

Fully customizable high tech mechanical dive watches, that are tailor-made and built to the
customer’s own and exacting specifications. Making them as individual as you are!
The use of unique and exotic materials the likes of which the watch industry
has yet to see. An industry first!

CUSTOMIZATION is EVERYTHING!

Unlike anyone else in the field of dive watches with the sheer flexibility and versatility of their
customizable watches; H2O give you a whole new experience in self customization.

 
The screw link tools in the kit are stripped. So no using them. Anyone know what size Allen is needed?
 
H2O HEX SCREW DRIVER M1.5

Sorry to hear that. I've had the opposite problem. The heads of the screw bars are so poor and soft that they round out after one or two times using them. I told Clemens about this.
 
Back
Top Bottom